All Headlights | Tail Light | Warranty
Instructions for all head lights:
2000 B, 1700 P, 1200 D, 1200 R, 450 A, 450 D
Nitelights are simple to own and operate.
To charge. Plug charger into AC socket and connect the battery pack. The charger light will indicate green when the pack is at 100%.
To operate lights.
Attach light to bars or head/helmet mount using the rubber mounting bands.
Helmet Mount. Use the Velcro straps on the Helmet mount to attach to Helmet. Cut off excess Velcro. Attach the mid sized mounting band to the light, slide under the plastic mount and attach to the head unit.
Head Mount. Place onto head and adjust the straps to fit. Attach the mid sized mounting band to the light, slide under the plastic mount and attach to the head unit. If using the 450 Apocalypse with the head mount, Remove the battery from its pouch and insert into the sleeve on the top of the head strap.
Plug the battery into the head unit.
Press the button at the rear of the light to scroll through modes
Hold the button for three seconds to turn off
2000 Beast – The light on the top of the head unit glows different colours for every 25% of charge. Green, Blue, Orange and Red. Note that the light may change from Green to Blue quicker than expected. This is normal
1700 Pacifier – The light on the rear of the head unit glows different colours for every 25% of charge. Green, Blue, Orange and Red. Note that the light may change from Green to Blue quicker than expected. This is normal
1200 Revelation and 450 Apocalypse – The light on the rear of the head unit glows Green and changes to Red when 10% of battery charge remains
The lights and battery pack are waterproof however do not submerse in water and ensure the products are dried after use if wet.
Ensure you plug and unplug the leads by holding the plugs. Do not attempt to pull the plugs apart using the leads as this will damage the inner cable.
To unplug, simple grip both plugs tight and twist the plugs while pulling apart.
Do not attempt to measure voltage on the batteries. A short circuit will damage the battery packs inner circuitry.
Always unplug the battery when not in use. Do not leave the lights on high power in a static position as this may cause the unit to overheat and/or pose a potential fire risk if surrounded by flammable material.
Avoid looking directly into the light, it’s VERY BRIGHT!
Enjoy your Adventure Nitelights Product…
Changing Lenses
1700 Pacifier. The pack comes with two lens, Spot and diffused. Unscrew the front Silver bezel and carefully remove the lens. Replace the lens carefully ensured the leds line up exactly with the dimples on the lens. Screw the bezel back into place.
1200 Revelation and 450 Apocalypse. The pack comes with two lens, Spot and diffused. Unscrew the front Silver Bezel and replace the lens, ensure the rubber seal remains in place. Screw the bezel back on.
Instructions for Tail LIght
Nitelights are simple to own and operate.
To charge. Plug charger into AC socket and connect the battery pack. The charger light will indicate green when the pack is at 100%.
To operate lights. Attach Tail light to your seat post using the rubber mounting bands.
Plug the battery into the head unit.
Press the button at the rear of the light to scroll through modes.
Single quick press for one Led static, one flashing. In this mode hold the button to change to alternating flash mode
Single quick press to go back to default both Led static mode
Two quick presses for one Led static, one flashing. In this mode hold the button to change to strobe mode.
To Turn off, hold the button for three seconds
The lights and battery pack are waterproof however do not submerse in water and ensure the products are dried after use if wet.
Ensure you plug and unplug the leads by holding the plugs. Do not attempt to pull the plugs apart using the leads as this will damage the inner cable.
To unplug, simple grip both plugs tight and twist the plugs while pulling apart.
Do not attempt to measure voltage on the batteries. A short circuit will damage the battery packs inner circuitry.
Always unplug the battery when not in use. Do not leave the lights on high power in a static position as this may cause the unit to overheat and/or pose a potential fire risk if surrounded by flammable material.
Avoid looking directly into the light, it’s VERY BRIGHT!
Enjoy your Adventure Nitelights Product…
Warranty for all products
Congrats on buying one of the best value cycle and adventure lights on the market
This product comes with a one year limited warranty
IMPORTANT Evidence of the original purchase is required for warranty service
Nitelights warrants to the original retail owner for the duration of this warranty this Adventure Nitelight and its accessories to be free from defects in materials and craftsmanship.
PARTS COVERED This warranty covers for one (1) year, the product and included accessories
The warranty will be deemed invalid if the product is
a/ Damaged or not maintained as reasonable and necessary
b/ Modified or altered
c/ Improperly used
d/ Repaired by someone other than Dept Of Adventure Ltd
e/ Used in conjunction with any equipment or parts or as part of a system not manufactured by Adventure Nitelights
STATEMENT OF REMEDY In the event that the product does not conform to this warranty at any time while this warranty is in effect, the warrantor, at its discretion will repair or replace the product and return it to you without any charge for parts and service. This warranty does not provide for reimbursement or payment of incidental or consequential losses. This EXPRESS WARRANTY is in addition to and does not in any way affect your rights under the CONSUMER GAURANTEES ACT.
PROCEDURE FOR OBTAINING PERFORMANCE OR WARRANTY In the event that the product does not conform to this warranty, the product should be shipped or delivered freight prepaid, with evidence of original purchase to the warrantor at
Nitelights
20 Myres Street
Pillans Point
Tauranga 3110
NEW ZEALAND
Ph. 07 5764324